INCH-POUND
MIL-DTL-28830E
18 October 2013
SUPERSEDING
MIL-DTL-28830D
18 July 2005
DETAIL SPECIFICATION
CABLE, RADIO FREQUENCY, COAXIAL, SEMIRIGID, CORRUGATED OUTER CONDUCTOR,
GENERAL SPECIFICATION FOR
This specification is approved for use by all Departments and Agencies
of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the general requirements for coaxial, semirigid, radio frequency
cable with corrugated outer copper conductors (see 6.1).
1.2 Classification.
1.2.1 Part or Identifying Number (PIN). The term PIN is equivalent to the term part number which
was previously used in this specification. The PIN (when applicable) consists of the letter "M", the
basic number of the specification sheet, and an assigned dash number (see 3.1), as shown in the
following example:
M 28830/1 I
Dash designation
Specification sheet number
Military designator
Comments, suggestions, or questions on this document should be addressed to: Defense
Supply Center Columbus, ATTN: VAI, P. O. Box 3990, Columbus OH 43218-3990 or by email
to RFConnectors@dla.mil. Since contact information can change, you may want to verify the
currency of this address information using the ASSIST Online database at https://assist.dla.mil.
AMSC N/A
FSC 6145
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business