MIL-DTL-3702F
TABLE VII. Inspection sample.
1/
Production lot size
Sample size
2 to 8
2
8 to 15
3
16 to 25
5
26 to 50
8
51 to 90
13
91 to 150
20
151 to 280
32
281 to 500
50
501 to 1200
80
1201 to 3200
125
3201 to 10000
200
10001 to 35000
315
1/ Lot size will be based on number of reels, spools,
or coils of product.
4.5.1.3 Sampling for test. Samples for test are from units of product that have been subjected to,
and have passed, the examination specified in table VIII. Samples shall be a 20 foot (6.1 meters) length
of cable taken from each 2,000 feet (610 mm) and fraction thereof of cable in the lot.
4.5.2 Examination.
4.5.2.1 Acceptance. Each sample selected in accordance with 4.5.1.2 shall be examined to
determine conformance with the requirements in table VIII. If one or more defects are found in the
inspection sample, then the production lot shall be inspected for that particular defect and defects
removed. A second inspection sample shall be selected from the production lot and all sampling tests
performed again. If one or more defective items are found in the second inspection sample, the
production lot shall be rejected and shall not be supplied to this specification.
TABLE VIII. Visual and mechanical inspection.
Examination
Method of examination
1/
Visual and SIE
3.6)
1/
Visual and SIE
Dimensions, out of tolerance (see 3.3.7)
Marking, improper (see 3.5)
Visual
Age, improper (see 3.6 )
Visual
Finish, improper (see 3.3.8)
Visual
Workmanship, faulty (see 3.7)
Visual
1/ SIE: Standard inspection equipment.
4.5.3 Test. Samples selected in accordance with 4.5.1.3 shall be subjected to the conformance test
15
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business