MIL-DTL-3702F
SAE INTERNATIONAL
SAE-AS1241
-
Fire Resistant Phosphate Ester Hydraulic Fluid for Aircraft
SAE-AMS1424
-
Deicing/Anti-Icing Fluid, Aircraft, SAE Type I
SAE-J1966
-
Lubricating Oil; Piston Engine (Nondispersant Mineral oil)
(Copies of these documents are available online at https://www.sae.org or from the SAE World
Headquarters, 400 Commonwealth Drive, Warrendale, PA 15096-0001.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict
between the text of this document and the references cited herein, the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3. REQUIREMENTS
3.1 Qualification. The cables furnished under this specification shall be products that are authorized
by the qualifying activity for listing on the applicable qualified products list before contract award (see 6.3
and 4.4).
3.2 Materials. Materials shall be as specified herein and in referenced specifications and standards.
Materials shall be free of defects which adversely affect performance of the finished product.
3.2.1 Conductor. The conductor shall consist of either copper or steel stranded wire.
3.2.1.1 Copper strands.
3.2.1.1.1 Low, medium, and high temperature cable. The copper wire strands used in the
conductors shall be soft or drawn-annealed copper conforming to A-A-59551.
3.2.1.1.2 Tin coating. The low temperature (L-designated) copper wire strands shall be coated
with commercially pure tin in accordance with ASTM-B33.
3.2.1.1.3 Nickel coating. The medium and high temperature (M and H-designated) copper
wire strands shall be coated with nickel in accordance with ASTM-B355. The thickness of the
coating shall be not less than 50 microinches (µin.).
3.2.1.2 Steel strands. The steel wire strands used in a steel conductor shall be annealed,
corrosion resistant steel wire conforming to ASTM-A580/A580M, type 302 or 304.
3.2.2 Insulation. The insulation shall be non-hygroscopic, elastomeric or semi-rigid, virgin
material.
3.2.3 Braid. The braid shall be glass or other non-hygroscopic, fungus-resistant material.
3.2.4 Sheath. The sheath (outer covering) shall be of non-hygroscopic, flexible, seamless,
non-cracking, waterproof, slow-burning or non-flammable, oil and fungus resistant material.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business