MIL-DTL-24643C
TABLE VIII. Conformance inspection (see 6.2) - Continued.
Inspection
Requirement
Test method
Group D
Flame propagation
Specification sheet
General inspection group
Abrasion resistance (insulation)
Specification sheet
Accelerated aging
Specification sheet
Cabling aging (260 °C)
Specification sheet
Aging and compatibility (cable)
Specification sheet
(125+5 °C)
Cold working (minus 20 °C)
Specification sheet
Weathering (jacket)
Specification sheet
Electrical moisture absorption
Specification sheet
Temperature/humidity
Specification sheet
Aging stability
Specification sheet
Dimensional stability
Specification sheet
Stress resistance
Specification sheet
4.4.1 Inspection lot. An inspection lot shall consist of the total number of units of product of any one type,
size, and construction manufactured under essentially the same conditions.
4.4.2 Basic electrical tests. Basic electrical tests shall be in accordance with the applicable specification sheet
and shall be performed on each length of completed cable. For electrical test purposes, length of completed cable
shall be as defined in 6.7.4.a.
4.4.3 Sampling procedure. The required number of samples for groups A, B, C, and D inspections shall be
selected at random from the inspection lot. Nonconforming starting and finishing ends of cable shall be removed by
the manufacturer prior to selecting samples.
4.4.3.1 Sampling for group A inspections. Samples for group A inspections shall be selected from each lot in
accordance with table IX.
24
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business