U\)This specification covers conductor-insulated, jacketed, electrical cords used to fabricate combination headset-microphone extension cords and microphone extension cords for installation in defense aircraft equipped with intercommunication sets.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21

MIL-DTL-5898H

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3, 4 or 5 of this

specification. This section does not include documents cited in other sections of this specification or

recommended for additional information or as examples. While every effort has been made to ensure the

completeness of this list, document users are cautioned that they must meet all specified requirements of

documents cited in sections 3, 4 or 5 of this specification, whether or not they are listed.

2.2 Government documents.

2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and

handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the

issues of these documents are those cited in the solicitation or contract.

FEDERAL STANDARD

FED-STD-228

Cable and Wire, Insulated; Methods of Testing

DEPARTMENT OF DEFENSE SPECIFICATION

MIL-C-572

Cord, Yarns and Monofilaments Organic Synthetic Fiber

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-104

Limits for Electrical Insulation Color

MIL-STD-130

Identification Marking of U.S. Military Property

(Copies of these documents are available online at https://assist.dla.mil/quicksearch/ or from the

Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-

5094.)

2.3 Non-Government publications. The following documents form a part of this document to the

extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the

in the solicitation or contract.

ASTM INTERNATIONAL

ASTM B33

Standard Specification for Tinned Soft or Annealed Copper Wire for

Electrical Purposes

ASTM G21

Standard Practice for Determining Resistance of Synthetic Polymeric

Materials to Fungi

(Copies of these documents are available online at https://www.astm.org or from the ASTM

International, P.O. Box C700, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)