For Parts Inquiries call (727) 344-9615
A Service Disabled Veteran Owned Small Business
© Copyright 2015 Integrated Publishing, Inc.

MIL-DTL-55036 Cable, Telephone, Wm-130\( \)/GThis specification covers the requirements of a 26 pair telephone cable, insulated with polyethylene, armored with a galvanized steel braid, and covered with a polyvinylchloride low temperature jacketing compound. This cable is designated as Cable, Telephone WM-130\( \)/G \(see 6.8\).

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21


. . .
MIL-DTL-55036C
FEDERAL SPECIFICATIONS
L-P-390
-
Plastic, Molding and Extrusion Material, Polyethelyne and Copolymers,
(Low, Medium and High Density).
COMMERCIAL ITEM DESCRIPTIONS
A-A-59551
-
Wire, Electrical, Copper, (Uninsulated)
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-I-631
-
Insulation, Electrical, Synthetic-Resin Composition, Nonrigid.
MIL-DTL-12000
-
Cable, Cord, and Wire, Electric; Packing of
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-
5094.)
2.2.2 Other Government documents, drawings, and publications. The following other Government
documents, drawings, and publications form a part of this document to the extent specified herein.
Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
CECOM DWG SM-B-159154
-
Grip Cable
(Copies of these documents are available online at https://www.monmouth.army.mil/CELCMS/lrc/lrc.html
or from the U.S. Army Communications and Electronics Materiel Readiness Command Logistics
Engineering Director, 12 WD Bldg 601 McAfee Center, Fort Monmouth, NJ 07703.)
2.2.3 Non-Government publications. The following documents form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
ASTM INTERNATIONAL
ASTM-A90/A90M
-
Standard Test Method for Weight [Mass] of Coating on Iron and Steel
Articles with Zinc or Zinc - Alloy Coatings.
ASTM A239
-
Standard Practice for Locating the Thinnest Spot in a Zinc
(Galvanized) Coating on Iron or Steel Articles.
ASTM D573
-
Standard Test Method for Rubber Deterioration in an Air Oven.
ASTM D1248
-
Standard Specification for Polyethylene Plastics Extrusion Materials for
Wire and Cable.
(Copies of these documents are available online at https://www.astm.org or from ASTM International,
P.O. Box C700, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
2



For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business

© Copyright 2015 Integrated Publishing, Inc. Site Design & Marketing by Strategico.