MIL-DTL-55036C
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the
contract or order (see 6.2). When packaging of materiel is to be performed by DoD or in-house contractor
personnel, these personnel need to contact the responsible packaging activity to ascertain packaging
requirements. Packaging requirements are maintained by the Inventory Control Point's packaging
activities within the Military Service or Defense Agency, or within the Military Service's System
Commands. Packaging data retrieval is available from the managing Military Department's or Defense
Agency's automated packaging files, CD-ROM products, or by contacting the responsible packaging
activity.
6. NOTES
(This section contains information of a general or explanatory nature, which may be helpful, but is not
mandatory).
6.1 Intended use. The cable is intended for use in field telephone voice frequency applications.
6.2 Acquisition requirements. Acquisition documents should specify the following:
a. Title, number, and date of the specification.
b. The specific issue of individual documents referenced.
c. Complete type designation.
d. Packaging requirements.
6.3 Definitions.
6.3.1 Unit of product. The unit of product is defined as a length of cable.
6.3.2 Length. The length is defined in the invitation for bid and contract.
6.3.3 Lot size. The lot size as determined to be the number of units of products as determined in 6.3.1
offered for inspection.
6.3.4 Sample. The sample consists of that number of sample units required by the sampling plan for
the lot size determined in 6.3.3.
6.3.5 Selection of sample. The number of sample units required for inspection chosen by selecting 1
coil, spool, or reel for each sample unit required, after which the coil, spool or reel will be treated as the
sample unit for purposes of inspection.
6.3.6 Specimen. A specimen is an individual piece of cable taken from a sample unit.
6.4 Group C inspection. Approval to ship may be withheld, at the discretion of the Government,
pending the decision from the contracting officer on the adequacy of corrective action (see 4.5.3.1).
19
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business