INCH-POUND
MIL-DTL-49055F
14 November 2012
SUPERSEDING
MIL-DTL-49055E
9 January 2008
DETAIL SPECIFICATION
CABLES, POWER, ELECTRICAL,
(FLEXIBLE, FLAT, UNSHIELDED), (ROUND CONDUCTOR),
GENERAL SPECIFICATION FOR
Reactivated after 2 August 2006 and may be used for new and
existing designs and acquisitions.
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers flexible, flat, unshielded electrical cables with either solid or
stranded inner round conductors.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements of
documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards and handbooks
form a part of this document to the extent specified herein. Unless otherwise specified, the issues of
these documents are those cited in the solicitation or contract.
Comments, suggestions, or questions on this document should be addressed to Defense
Supply Center Columbus, ATTN: DSCC-VAI, P.O. Box 3990, Columbus, Ohio 43218-3990,
or email to WireCable@dscc.dla.mil. Since contact information can change, you may want
to verify the currency of this address information using the ASSIST Online database at
AMSC N/A
FSC 6145
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business