MIL-DTL-24640C
d.
Contract or order number.
e.
Contractor's name.
f.
Manufacturer's name (if other than contractor).
g.
Gross weight.
h.
One continuous length or the sequence of lengths on the reel indicated in feet, whichever is applicable.
3.7.5.4 Coils. Coils shall contain one continuous length of cable (standard length, see table X).
TABLE X. Cable lengths.
Remnant lengths price
Random
Nominal
Standard
Scrap lengths
reduction
Type of
lengths no
length
lengths no price
not acceptable
package
price reduction
(feet)
reduction (feet)
(feet)
5 percent
10 percent
(feet)
(feet)
(feet)
Coil
250
300 to 200
199 to 100
99 to 75
74 to 50
49 to 0
Coil
500
550 to 450
449 to 150
149 to 100
99 to 50
49 to 0
Reel
250
300 to 200
199 to 100
99 to 75
74 to 50
49 to 0
Reel
500
550 to 450
449 to 150
149 to 100
99 to 50
49 to 0
NOTE: For orders greater than 2500 feet, no more than 10% of the total length shall be random lengths.
3.7.5.5 Year marking. In addition to any other required marking, coils shall be marked with a keyed series of
colors to indicate the year of manufacture. This marking shall consist of a stripe approximately 2 inches wide and
colored for the particular year of manufacture. The cycle of colors shall be the same as those used for year marking
of reels (see 3.7.5.1).
3.7.5.6 Identification. Two shipping tags shall be securely attached to each coil, one inside and one outside the
wrapping, and marked with the following information.
a.
Type and size of cable.
b.
Footage.
c.
Contract or order number.
d.
Contractor's name.
e.
Manufacturer's name (if other than contractor).
f.
Gross weight.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are classified as follows:
a.
Qualification inspection (see 4.3).
b.
Conformance inspection (see 4.4).
4.2 Inspection conditions. Unless otherwise specified (see 6.2), all inspections shall be performed in
accordance with the test conditions specified in 4.5.
4.3 Qualification inspection. Qualification inspection shall consist of the examination and tests specified in
16
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business