MIL-DTL-24640C
a. Springiness. The outside diameter (O.D.) of the coil formed by any of the specimens around the mandrel,
as measured at a middle portion of the specimen, exceeds inch.
Toughness. Any specimen withstands fewer than ten 90-degree bends without breaking.
b.
4.9 Certified test reports. The contractor shall prepare test reports as specified (see 6.2.1 and 6.2.5).
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or
order (see 6.2). When packaging of materiel is to be performed by DoD or in-house contractor personnel, these
personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging
requirements are maintained by the Inventory Control Point's packaging activities within the Military Service or
Defense Agency, or within the military service's system commands. Packaging data retrieval is available from the
managing Military Department's or Defense Agency's automated packaging files, CD-ROM products, or by
contacting the responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
6.1 Intended use. Cables specified herein are intended for use in various applications involving Naval ships
and shore stations.
6.2 Acquisition requirements. Acquisition documents should specify the following:
a.
Title, number, and date of this specification.
b.
Military part number (see 1.3).
c.
Type and size of cable or cord required with reference to applicable specification sheet (see 3.1).
Jacket color required (see 3.3.3).
d.
e. Identification codes required if other than the standard identification code and where applicable, twisted
pair and triad identification codes (see 3.7.1).
Identification method required if other than identification Method 1 or Method 3 (see 3.7.2).
f.
Placement of completed cables if other than on reels (see 3.7.5).
g.
Inspection conditions (see 4.2).
h.
Packaging requirements (see 5.1).
i.
j.
k.
Quantity required (see 6.2.3).
6.2.1 Certified test reports. The contractor will prepare test reports in accordance with the data-ordering
document (see 6.2). The test report will contain the following information:
Manufacturer's QPL number and date or serial number and date of NAVSEA letter of approval.
a.
b. A statement to the effect that the product was constructed from materials listed on the manufacturer's
approved details of construction sheet.
c.
A statement that the product meets all of the requirements of this specification.
d.
Results of all conformance tests showing actual values obtained.
e.
Year and month cable or cord was manufactured.
f.
Serial numbers of the marker tape taken from each end of each length of cable or cord.
g.
Customer's name and contract or order number.
h. A statement that the product contains no metallic mercury or mercury compounds and is free from mercury
contamination.
i.
The serial number of all NAVSEA letters approving deviations from the approved specification sheets.
46
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business