MIL-DTL-915/22J
Cable filler removability ........................................................................................................ No failure
QUALIFICATION INSPECTION:
Qualification inspection shall include basic electrical, all of groups A, B, and C, plus
the following:
Cable aging and compatibility (95 ± 3°C) ................................................................ No failure
Flame propagation ..................................................................................................... No failure
Jacket durometer (type A) hardness, minimum ..................................................................... 80
UNIT ORDERING LENGTHS:
Size
Feet (nominal)
11
2500
31
1000
PART OR IDENTIFYING NUMBER (PIN): The PIN consists of the letter M, the general
specification number along with the specification sheet, and a dash number compiled from a code.
Refer to MIL-DTL-915 for the Type and Size code.
PART OR IDENTIFYING NUMBER (PIN): The PIN consists of the letter M, the general
specification number along with the specification sheet, and a dash number representing type and
size. Refer to MIL-DTL-915 for an example.
915
/22-
X-X
M
Specification
Specification
Type and Size
Prefix for
Number
Sheet
Military
Number
Specification
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the extent of the changes.
Custodians:
Preparing activity:
Army MI
Navy - SH
Navy SH
(Project 6145-2317-007)
Review activities:
Army AR, CR
Navy - CG, EC
DLA - CC
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business