INCH-POUND
MIL-DTL-915/22J
22 August 2002
SUPERSEDING
MIL-C-915/22H
29 September 1989
DETAIL SPECIFICATION SHEET
CABLE, SPECIAL PURPOSE ELECTRICAL, 300 VOLTS,
FOR OUTBOARD USE ONLY (NOT FOR INBOARD USE), TYPE TSP (INCLUDING
VARIATION TYPE TPSA)
This specification is approved for use by all Departments and Agencies of the Department
of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet
and the issue of MIL-DTL-915 listed in that issue of the Department of Defense Index of
Specifications and Standards (DoDISS) specified in the solicitation.
REQUIREMENTS:
Qualification required.
Construction (watertight)
First
- Copper conductor, AWG size 22, class K stranding, tin coated.
Second - Polyvinyl chloride insulation (80°C). Nominal wall thickness 0.015 inch.
Telephone identification code applied by method 3.
Third
- Two conductors cabled together to form a pair with a lay not greater than
2-1/2 inches.
Fourth - The specified number of pairs (see table I) cabled with a lay not greater than
10 inches in the outer layer. Non-fibrous fillers shall be employed. Cabling
sequence shall be consecutive, starting with pair no. 1, from center outward.
Fifth
- Binder tape applied helically with overlap.
Construction variant for type TSP
Sixth
- Thermoplastic jacket (gray). Nominal wall thickness 0.080 inch. Cable
surface marking required.
AMSC N/A
1 of 3
FSC 6145
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business