MIL-DTL-27072/25D
REQUIREMENTS:
Design and construction:
See figure 1
Number of conductors:
2
105 °C
Temperature rating:
Components:
Basic wire:
SAE AS22759/11-20* (formerly M16878/4BGE***) or
NEMA HP-3EWBGE*, (formerly M16878/21BGE***)(see table I)
Conductor:
Silver coated copper
Primary insulation:
Polytetrafluoroethylene
Colors:
White with brown and blue tracers
White with green and blue tracers
Jacket over insulation:
Not applicable
Filler:
Material:
In accordance with MIL-DTL-27072
Lay:
1.0 inch
Cabling:
Not applicable
Binder tape material:
Not applicable
Shield:
Material:
Silver coated copper
Gauge:
36 AWG
Braid angle:
20 to 40 degrees
Jacket undershield:
Not applicable
Sheath:
Material:
Polyvinyl chloride
Wall thickness:
.030 inch nominal
Tensile strength:
In accordance with MIL-DTL-27072
Ultimate elongation:
In accordance with MIL-DTL-27072
Accelerated aging:
In accordance with MIL-DTL-27072
Color:
See MIL-DTL-27072
Finished cable:
See table I
Cold bend:
Mandrel size in accordance with MIL-DTL-27072
Dielectric withstanding voltage:
2,000 V rms
Conductor resistance:
In accordance with basic wire specification
2