MIL-DTL-24643C
DEPARTMENT OF DEFENSE SPECIFICATIONS
(See supplement 1 for list of specification sheets.)
MIL-DTL-17
-
Cables, Radio Frequency, Flexible and Semirigid, General Specification
for
MIL-C-572
-
Cords, Yarns and Monofilaments Organic Synthetic Fiber
MIL-I-631
-
Insulation, Electrical, Synthetic-Resin Composition, Nonrigid
MIL-Y-1140
-
Yarn, Cord, Sleeving, Cloth and Tape-Glass
MIL-DTL-5624
-
Turbine Fuel, Aviation, Grades JP-4 and JP-5
MIL-DTL-16884
-
Fuel, Naval Distillate
MIL-PRF-17331
-
Lubricating Oil, Steam Turbine and Gear, Moderate Service
MIL-PRF-17672
-
Hydraulic Fluid, Petroleum, Inhibited
MIL-PRF-23699
-
Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code
Number O-156
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-2003-4
-
Electric Plant Installation Standard Methods for Surface Ships and
Submarines (Cableways)
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.2.2 Other Government documents, drawings, and publications. The following other Government documents,
drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified,
the issues of these documents are those cited in the solicitation or contract.
AERONAUTICAL DESIGN STANDARD
ADS-69-PRF
-
Hydraulic Fluid, Petroleum Base; Aircraft, Missile, and Ordnance
(Copies of this document are available from the AMCOM Standardization Office at
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
AMERICAN NATIONAL STANDARDS INSTITUE (ANSI)
ANSI/ASME B46.1
- Surface Texture, Surface Roughness, Waviness, and Lay
ANSI/ISA MC96.1
- Temperature Measurement Thermocouples
ANSI/TIA/EIA-568-B.2
- Commercial Building Telecommunications Cabling Standard - Part 2:
Balanced Twisted-Pair Cabling Components
ANSI/EIA-364-31B
- Humidity Test Procedure for Electrical Connectors and Sockets
(Copies of these documents are available from the American National Standards Institute, 25 W. 43rd St, 4th
Floor, New York, NY 10036 or online at https://webstore.ansi.org/.)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business