MIL-DTL-13777K
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list,
document users are cautioned that they must meet all specified requirements documents cited in sections 3, 4,
or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form
a part of this document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those cited in the solicitation or contract.
FEDERAL SPECIFICATION
L-P-390
-
Plastic, Molding and Extrusion Material, Polyethylene and
Copolymers (Low, Medium and High Density)
FEDERAL STANDARDS
FED-STD-228
-
Cable and Wire, Insulated; Methods of Testing
FED-STD-601
-
Rubber, Sampling and Testing
COMMERCIAL ITEM DESCRIPTION
A-A-59551
-
Wire, Electrical, Copper (Uninsulated)
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-DTL-17
-
Cables, Radio Frequency, Flexible and Semi rigid, General
Specification For
MIL-I-631
-
Insulation, Electrical, Synthetic-Resin Composition, Nonrigid
(See Assist database for list of specification sheets.)
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-104
-
Limits for Electrical Insulation Colors
MIL-STD-810
-
Environmental Engineering Considerations and Laboratory Tests
MIL-STD-2223
-
Test Methods for Insulated Electric Wire
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business