INCH-POUND
MIL-DTL-13169E
3 November 2011
SUPERSEDING
MIL-DTL-13169D
11 November 2006
DETAIL SPECIFICATION
WIRE, ELECTRICAL
(FOR INSTRUMENT TEST LEADS)
Inactive for new design after 16 June 1997.
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers one type of single-conductor, AWG No 18, stranded, electrical
wire, insulated for voltages up to and including 1,000 volts root mean square (rms) with Buna-S
compound. Wire covered by this specification is classified as type TL-G. This wire is primarily intended
for use as instrument test leads.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements of
documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
Comments, suggestions, or questions on this document should be addressed to DLA Land and Maritime, ATTN:
VAI, P.O. Box 3990, Columbus, OH 43218-3990, or email to WireCable@dla.mil. Since contact information can
change, you may want to verify the currency of this address information using the ASSIST Online database at
AMSC N/A
FSC 6145
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business