MIL-DTL-10392 Cord, Electrical \(Audio, Miniature\)This specification covers miniature audio cords with stranded wire conductors for use switch microphones, telephone, switchboards, and associated communication equipment. These cords are intended for use at potentials up to 300 volts \(rms\) at audio frequencies, and at temperatures from -40 degrees to +75 degrees C \(see 3.2 for individual types.\)

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14

MIL-DTL-10392F

2.3 Non-Government publications. The following documents form a part of this document to the

extent specified herein. Unless otherwise specified, the issues of the documents are those cited in the

solicitation or contract.

ASTM INTERNATIONAL

ASTM-B33

Standard Specification for Tinned Soft of Annealed Copper Wire

for Electrical Purposes

(Copies of these documents are available online at https://www.astm.org or from ASTM International,

P.O. Box C700, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)

NCSL INTERNATIONAL

NCSL-Z540.3

Requirements for the Calibration of Measuring and Test

Equipment

(Copies of this document are available from https://www.ncsli.org or from NCSL International, 2995

Wilderness Place, Suite 107, Boulder, CO 80301.)

2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict

between the text of this document and the references cited herein, the text of this document takes

precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a

specific exemption has been obtained.

3. REQUIREMENTS

3.1 Material. The material used in the cords shall be as herein after specified.

3.2 General. The cord types shall be as specified in table I and shall be constructed as follows: