MIL-DTL-10392F
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the
contract or order. When packaging of materiel is to be performed by DoD personnel or in-house
contractor personnel, these personnel need to contact the responsible packaging activity to ascertain
packaging requirements. Packaging requirements are maintained by the Inventory Control Point's
packaging activity within the Military Service or Defense Agency, or within the military service's system
commands. Packaging data retrieval is available from the managing Military Department's or Defense
Agency's automated packaging files, CD-ROM products, or by contacting the responsible packaging
activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not
mandatory.)
6.1 Intended use. The cords covered by this specification are intended for use with microphones,
receivers, headsets, handsets, etc., where small diameter and flexibility are advantageous.
6.2 Acquisition requirements. Acquisition documents should specify the following:
a. Title, number, and date of this specification.
b. Type required (see 3.2).
c. Length of finished cords to be delivered.
6.3 Tin whisker growth. The use of alloys with tin content greater than 97 percent, by mass, may
exhibit tin whisker growth problems after manufacture. Tin whiskers may occur anytime from a day to
years after manufacture and can develop under typical operating conditions, on products that use such
materials. Conformal coatings applied over top of a whisker-prone surface will not prevent the formation
of tin whiskers. Alloys of 3 percent lead, by mass, have shown to inhibit the growth of tin whiskers. For
additional information on this matter, refer to ASTM-B545 (Standard Specification for Electrodeposited
Coatings of Tin).
6.4 Subject term (key word) listing.
Polytetrafluoroethylene (PTFE)
Separator
Bunch strands
14
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business