INCH-POUND
MIL-DTL-915/58F
22 August 2002
SUPERSEDING
MIL-C-915/58E
29 September 1989
DETAIL SPECIFICATION SHEET
CABLE, POWER ELECTRICAL, 600 VOLTS, FOR OUTBOARD USE ONLY
(NOT FOR INBOARD USE), TYPE MWF
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification
sheet and the issue of MIL-DTL-915 listed in that issue of the Department of Defense Index of
Specifications and Standards (DoDISS) specified in the solicitation.
REQUIREMENTS:
Qualification required.
Construction (watertight)
First
- Copper, conductor, AWG no. 18, class B stranding, tin coated.
Second - Insulation of synthetic rubber or cross-linked polyethylene. Nominal
thickness of 0.020 inch.
Third
- Jacket of clear polyamide in accordance with ASTM D 4066, nominal
thickness 0.005 inch. Standard identification code applied by method 1.
Fourth - The required number of conductors (see table I) cabled together with a
maximum lay of 20 times the pitch diameter of the layer. Cabling
sequence to be consecutive, starting with no. 1, from the center outward.
Fillers as necessary in order to form a firm, round assembly. Fillers shall
be nonfibrous.
Construction (watertight) (continued)
Fifth
- Binder tape applied helically with overlap.
Sixth
- Arctic type neoprene jacket, black. (See table I for thickness). Cable
surface marking required.
AMSC N/A
1 of 4
FSC 6145
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business