MIL-DTL-915/1F
Group C:
Flammability - inches, maximum ......................................................................................................... 2
Physicals (aged)
Insulation (conductor)
Air pressure heat
Tensile strength - percent of unaged, minimum............................................50
Elongation- percent of unaged, minimum.....................................................50
Jacket
Air pressure heat
Tensile strength - percent of unaged, minimum............................................50
Elongation - percent of unaged, minimum....................................................50
Hot oil immersion
Tensile strength - percent of unaged, minimum............................................60
Elongation- percent of unaged, minimum.....................................................60
QUALIFICATION INSPECTION:
Qualification inspection shall include basic electrical, plus all of groups A, B, and C.
UNIT ORDERING LENGTH:
1000 feet (nominal).
PART OR IDENTIFYING NUMBER (PIN): The PIN consists of the letter M, the general
specification number along with the specification sheet, and a dash number representing type and
size. Refer to MIL-DTL-915 for an example.
PART OR IDENTIFYING NUMBER (PIN): The PIN consists of the letter M, the general
specification number along with the specification sheet, and a dash number representing type and
size. Refer to MIL-DTL-915 for an example.
M
915
/1-
X-X
Type and Size
Prefix for
Specification
Specification
Number
Sheet
Military
Specification
Number
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the extent of the changes.
Custodians:
Preparing activity:
Army MI
Navy - SH
Navy SH
(Project 6145-2317-001)
Review activities:
Army AR, CR
Navy - CG, EC
DLA - CC
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business