MIL-DTL-5846D
SOCIETY OF AUTOMOTIVE ENGINEERS, INC. (SAE)
SAE J1966
-
Aircraft Piston Engine
(Nondispersant Mineral) Lubricating
Oils
(Copies of this document are available from Society of Automotive Engineers,
Inc., 400 Commonwealth Drive, Warrendale, PA 15096-0001, or online at
https://www.sae.org.)
3. REQUIREMENTS
3.1 Preproduction. Unless otherwise specified, preproduction inspection is required and
preproduction samples shall meet the requirements specified herein (see 6.2.1).
3.2 Material. Reclaimed materials shall be required to the maximum extent possible
without jeopardizing the intended use of the item.
3.3 Construction. The wire shall be constructed as follows:
Type 1
Class A Bare solid chromel or alumel conductor
Type 1
Classes B and D
First Solid or stranded chromel or alumel conductor
Second Inner wrap (if required)
Third Primary insulation
Fourth Layer of braid, fibrous covering or other approved
material (if required)
Fifth Outer protective coating (if required)
Type 1
Classes C and E
First Solid or stranded chromel and alumel conductors
Second Inner wrap (if required) (individual conductors)
Third Primary insulation (individual conductors)
Fourth Layer of braid, fibrous covering or other approved
material (if required) (individual conductors)
Fifth Chromel and alumel insulated wires laid in parallel
and covered with duplexing outer coating
Sixth Outer protective coating (if required)
Types 2, 3, and 4
Class A
First Stranded chromel and alumel conductors
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business