INCH-POUND
MIL-DTL-3883B
18 April 2003
SUPERSEDING
MIL-C-3883A
25 September 1970
DETAIL SPECIFICATION
CORD, ELECTRICAL, SHIELDED
(AUDIO FREQUENCY)
Inactive for new design after 16 June 1997
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers electrical cords composed of 1 to 7 conductors, 20 AWG, Styrene
butadiene rubber insulated and jacketed, with a shield beneath the jacket. These cords are intended for
use in audio frequency applications, at temperatures down to -55°C (see 3.2 for individual types).
2. APPLICABLE DOCUMENTS.
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification.
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of
this list, document users are cautioned that they must meet all specified requirements documents cited in
sections 3 and 4 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications and standards and handbooks. The following specifications standards and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those listed in the issue of the Department of Defense Index of
Specifications and Standards (DoDISS) and supplement thereto cited in the solicitation (see 6.2).
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of
use in improving this document should be addressed to: Defense Logistics Agency, Defense Supply
Center, Columbus (DSCC-VAI), P.O. Box 3990, Columbus, OH 43216-5000 by using the Standardization
Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A
FSC 6145
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business