For Parts Inquiries call (727) 344-9615
A Service Disabled Veteran Owned Small Business
© Copyright 2015 Integrated Publishing, Inc.

MIL-DTL-29606 Wire, Electrical, Stranded, Uninsulated Copper, Copper Alloy, Or Aluminum, Or Thermocouple Extension, General Specification ForThis specification covers concentric lay stranded and rope-lay stranded round electrical conductor fabricated from copper, copper alloy or aluminum. This specification also covers thermocouple extension conductor fabricated from nickel/chromium or nickel/aluminum/manganese. The conductors in this specification are suitable for use in insulated wires used in aerospace and other applications.

Pages 1 - - 2 - 3 - 4 - 5 - 6 - 7 - 8|||9 - 10 - 11|||


MIL-DTL-29606A
The above conductor is a size 20 conductor of silver coated annealed copper conductor with
general purpose diameter control.
1.2.1.1 Basic part number. The conductor military part number consists of the letter "M,"
the basic number of the applicable specification and the applicable alpha-numeric characters
formulated in the example (see 1.2.1).
1.2.1.2 Conductor size. A one- or two-digit designator from table II is used to designate
the conductor size.
1.2.1.3 Conductor material and coating designator. An alphabetic designator from table I
is used to designate the conductor material and conductor coating.
1.2.1.4 Conductor diameter tolerance. The conductor diameter dimensional tolerance is
designated as follows:
GP - General Purpose (see table II)
SD - Small Diameter (see table II)
Note: The GP conductors are inactive for new design for copper and copper alloy
conductors. All conductors without a distinct diameter tolerance (GP or SD) are
designated as general purpose (GP) diameter tolerance conductors.
2.
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of
this specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort
has been made to ensure the completeness of this list, document users are cautioned that they
must meet all specified requirements documents cited in sections 3 and 4 of this specification,
whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications and standards. The following specification and standards form a part
of this document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those cited in the solicitation or contract (see 6.2).
FEDERAL STANDARD
FED-STD-228
-
Cable and Wire, Insulated; Methods of Testing
2



For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business

© Copyright 2015 Integrated Publishing, Inc. Site Design & Marketing by Strategico.