MIL-DTL-28751A
DEPARTMENT OF DEFENSE SPECIFICATIONS
- Cables, Radio Frequency, Flexible and Semirigid, General Specification for.
(Copies of these documents are available online at https://assisst.daps.dla.mil/quicksearch/ or
https://assist.daps.dla.mil or from the Standardization Documents Order Desk, 700 Robbins Avenue,
Building 4D, Philadelphia, PA 19111-5094.)
2.2.2 Other Government documents, drawings and publications. The following other Government
documents, drawings, and publications form a part of this document to the extent specified herein. Unless
otherwise specified, the issues of these documents are those cited in the solicitation or contract.
NAVAL UNDERSEA WARFARE CENTER DIVISION NEWPORT (USRD)
USNUSL Technical Memorandum Number 220-74-62
(Application for copies should be addressed to Underwater Sound Reference Division, Code 216,
Building 1171-B, 1176 Howell St., Newport, RI 02841-1708 or email usrd@npt.nuwc.navy.mil.
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
AMERICAN NATIONAL STANDARDS INSTITUTE (ASTM)
ASTM D1248
- Polyethylene Plastics Extrusion Materials For Wire and Cable.
(Copies of these documents are available from www.astm.org or ASTM International, 100 Barr Harbor
Drive, Conshohocken, PA 19428-2959.)
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
SAE-AS28775
- Packing, Preformed, Hydraulic, +275 Deg. F. ("O"-Ring).
(Copies of these documents are available online from https://www.sae.org or from the Society of
Automotive Engineers, 400 Commonwealth Drive, Warrandale. PA 15096-001).
2.4 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein (except for related specification sheets), the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.3), a sample shall be subjected to first article inspection in
accordance with 4.2.
3.2 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or
environmentally preferable materials should be used to the maximum extent possible, provided that the
material meets or exceeds the operational and maintenance requirements, and promotes economically
advantageous life cycle costs.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business