INCH-POUND
MIL-DTL-28751A
23 May 2005
SUPERSEDING
MIL-C-28751(EC)
27 July 1970
DETAIL SPECIFICATION
CABLE, RADIO FREQUENCY RG-373/U
Inactive for new design after 16 June 1997.
This specification is approved for use by all Departments and
Agencies of the Department of Defense
1. SCOPE
1.1 This specification covers the design and construction of a high strength, single-conductor buoyant
cable.
1.2 Part or Identifying Number (PIN). The PIN for the cable described by this specification is RG-
373/U.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4 or 5 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements
cited in sections 3, 4 or 5 of this specification, whether or not they are listed.
2.2 Government documents
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
COMMERCIAL ITEM DESCRIPTIONS
A-A-59551 - Wire, Electrical, Copper (Uninsulated)
Comments, suggestions, or questions on this document should be addressed to: Defense
Supply Center Columbus, ATTN: VAI, P. O. Box 3990, Columbus OH 43218-3990 or by email to
RFConnectors@dscc.dla.mil. Since contact information can change, you may want to verify the
currency of this address information using the ASSIST Online database at
AMSC N/A
FSC 6145
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business