MIL-DTL-27072/83C
Design and construction:
See figure 1.
Number of conductors:
7
105 °C
Temperature rating:
Components:
Basic wire: M16878/17BFB***
(see table I)
Conductor:
Tinned copper
Primary insulation:
Polyvinyl chloride
Colors:
White with blue tracer
White with brown tracer
White with green tracer
White with orange tracer
White with red tracer
White with violet tracer
White with black
Jacket over insulation:
Polyamide
Color:
Natural
Filler: Not applicable
Cabling:
Not applicable
Binder tape material:
In accordance with MIL-DTL-27072
Shield:
Material:
Tinned copper
Gauge:
36 AWG
Braid angle:
Braid 20 to 40 degrees
Jacket undershield:
Not applicable
Sheath:
Material:
Polyvinyl chloride
Wall thickness:
.025 inch nominal
Tensile strength:
In accordance with MIL-DTL-27072
Ultimate elongation:
In accordance with MIL-DTL-27072
Accelerated aging:
In accordance with MIL-DTL-27072
Color:
See MIL-DTL-27072
Finished cable:
See table I
Cold bend:
Mandrel size in accordance with MIL-DTL-27072
Dielectric withstanding voltage:
2,000 V rms
Conductor resistance:
In accordance with basic wire specification
TABLE I. Construction data.
Basic wire except color
Finished
1/,2/
M16878/17BFB***
cable
(reference)
diameter
PIN 27072/83
Wire
Nominal
inch(mm)
Number of
Strand size
size
diameter
±10%
strands
(AWG)
inch(mm)
MACA*
22
7
30
.056(1.42)
.247(6.27)
1/ Asterisks (*) shall be replaced by the appropriate color designator.
2/ Dimensions are in inches. Metric equivalents are given for information only.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business