MIL-DTL-27072/29C
Design and construction:
See figure 1
Number of conductors:
12
105 °C
Temperature rating:
Components:
Basic wire:
M16878/17BFB* (see table I)
Conductor:
Tinned copper
Primary insulation:
Polyvinyl chloride
Colors:
White with black tracer
White with brown tracer
White with red tracer
White with orange tracer
White with green tracer
White with blue tracer
White with violet tracer
White with two black tracers
White with black and brown tracers
White with black and red tracers
White with black and orange tracers
White with black and green tracers
Jacket over Insulation:
Polyamide
Color:
Natural
Filler:
Not applicable
Cabling:
Number of conductors:
Twelve
Maximum pitch or lay:
3.0 inches
Binder tape material:
Not applicable
Shield:
Material:
Tinned copper
Gauge:
36 AWG
Braid angle:
20 to 40 degrees
Jacket undershield:
Not applicable
Sheath:
Material:
Polyvinyl chloride
Wall thickness:
.030 inch nominal
Tensile strength:
In accordance with MIL-DTL-27072
Ultimate elongation:
In accordance with MIL-DTL-27072
Accelerated aging:
In accordance with MIL-DTL-27072
Color:
See MIL-DTL-27072
Finished cable:
See table I
Cold bend:
Mandrel size in accordance MIL-DTL-27072
Dielectric withstanding voltage:
2,000 V rms
Conductor resistance:
In accordance with basic wire specification
2