INCH-POUND
MIL-DTL-24643/58F
1 October 2009
SUPERSEDING
MIL-DTL-24643/58E
22 August 2002
DETAIL SPECIFICATION SHEET
CABLE, ELECTRICAL, -20 °C TO +90 °C, TYPE LS2CS
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and
MIL-DTL-24643.
Construction, Non-Watertight
First
Copper conductor, tin-coated, 26 AWG, 7 strands, ASTM B286.
-
Second
Separator may be used at manufacturer's option where required to provide free-stripping
-
insulation.
Third
Thermoset insulation nominal wall thickness 0.015 inch; wall thickness may vary from
-
nominal as necessary, in order for completed cable to meet the specified electrical
requirements. Standard identification code shall be applied by Method 6.
Fourth
Two conductors (one black and one white) cabled together to form a pair in accordance
-
with table I. All pairs to be left-hand lay.
Fifth
The specified number of pairs (see table II) cabled together with a lay in accordance with
-
table III. Cabling sequence shall be consecutive, starting with no. 1 from the center
outward. Fillers may be used as necessary to form a firm, well-rounded assembly.
Sixth
An optional binder.
-
Seventh
Braided shield of tin-coated copper.
-
Eighth
Spirally-wrapped polyethylene terephthalate (polyester film) separator tape.
-
Ninth
Braided shield of tin-coated copper.
-
Tenth
An optional binder.
-
Cross-linked polyolefin jacket (see table II for thickness).
Eleventh
-
AMSC N/A
FSC 6145
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business