INCH-POUND
MIL-DTL-24643/51F
1 October 2009
SUPERSEDING
MIL-DTL-24643/51E
22 August 2002
DETAIL SPECIFICATION SHEET
CABLE, ELECTRICAL, -20 °C TO +90 °C, 1000 VOLTS, TYPE LSMNW
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and
MIL-DTL-24643.
Construction, Non-Watertight
First
Copper conductor, coated or uncoated 18 AWG, Class B stranding, in accordance with
-
ASTM B8.
Second
Separator may be used at manufacturer's option where required to provide free-stripping
-
insulation.
Third
Thermoset insulation 0.020 inch minimum average thickness. Standard identification
-
code shall be applied by Method 1 or Method 3. If identification Method 1 is used, the
insulation color shall be black.
The required number conductors (see table I), cabled together with a lay in accordance
Fourth
-
with 3.4.4 of MIL-DTL-24643, except that the lay of the two outer layers for Size 44
shall not be greater than 18 times the pitch diameter of the layer. Cabling sequence shall
be consecutive, starting with no. 1, from the center outwards. Fillers may be used as
necessary to form a firm well-rounded assembly.
Fifth
An optional binder.
-
Sixth
Cross-linked polyolefin jacket. Cable jacket thickness 0.050 inch minimum average.
-
AMSC N/A
FSC 6145
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business