INCH-POUND
MIL-DTL-24643/34F
1 October 2009
SUPERSEDING
MIL-DTL-24643/34E
22 August 2002
DETAIL SPECIFICATION SHEET
CABLE, ELECTRICAL, -20 °C TO +90 °C, 300 VOLTS, TYPE LSMS
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and
MIL-DTL-24643.
Construction, Non-Watertight
First
Copper conductor, tin-coated, 16 AWG, Class B stranding (7 by 0.0192 inches), in
-
accordance with ASTM B8 or ASTM B 286, 16 AWG with 19 strands.
Second
Separator may be used at manufacturer's option where required to provide free-stripping
-
insulation.
Third
Thermoset insulation (black). Minimum average wall thickness of 0.013 inch. Standard
-
identification code applied by Method 1.
The specified number of singles (see table I) shall be cabled together in accordance with
Fourth
-
3.4.4 of MIL-DTL-24643. Cabling sequence shall be consecutive starting with no. 1
from the center outward. Fillers may be used as necessary to form a firm well-rounded
assembly.
Fifth
An optional binder.
-
Sixth
Braided shield of tin-coated copper.
-
Seventh
An optional binder.
-
Eighth
Cross-linked polyolefin jacket. Minimum average wall thickness of 0.075 inch.
-
AMSC N/A
FSC 6145
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business