MIL-DTL-24640/24E
Characteristic impedance (at 1 MHz, ohms)
Not applicable
Watertightness
No failure
(see table IX of MIL-DTL-24640 for limits of water leakage)
Weight
No failure
Group B:
Cold bending
No failure
Drip
No failure
Cross-link proof test (percent, max.)
Jacket
50
Tear (lb/in thickness, min.)
35
Physicals (unaged)
Jacket
Tensile strength (lb/in2, min.)
1300
Elongation (percent, min.)
160
Attenuation (at 3 MHz, dB/100 feet, max.)
Not applicable
Gas flame (1 hour)
No failure
Group C
Physicals (aged), air oven
Jacket
Tensile strength (percent of unaged, min.)
60
Elongation (percent of unaged, min.)
60
Permanence of printing
25
(conductor insulation, cycles, Method 1 only, min.)
Permanence of printing (jacket, cycles, min.)
125
Heat distortion (percent of unaged, max.)
30
Cable sealant removability
No failure
Shrinkage
No failure
Surface transfer impedance (Type TTXOW only)
Milliohms per meter (max.)
700
EMP response (dB, min.)
60
Group D:
Flame propagation
No failure
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business