MIL-DTL-22931D
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements
documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards and handbooks. The following specifications, standards and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
FEDERAL STANDARD
FED-STD-228 Cable and Wire, Insulated, Method of Testing.
COMMERCIAL ITEM DISCRIPTION
A-A-59551
- Wire, Electrical, Copper (Un-insulated).
DEPARTMENT OF DEFENSE SPECIFICATION
MIL-R-39016/32
- Relays, Electromagnetic, DPDT, Low Level to 2 Amperes (Latching).
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-130
- Identification Marking of U. S. Military Property.
MIL-STD-202
- Test Methods for Electronics and Electrical Component Parts.
MIL-STD-1285
- Marking of Electrical and Electronic Parts.
(See supplement 1 for list of specification sheets.)
(Copies of these documents are available online at https://assist.dla.mil/ or from the Standardization
Document Order Desk, 700 Robbins Avenue, Building 4D,Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
ASTM INTERNATIONAL
ASTM B152/B152M - Copper Sheet, Strip, Plate, and Rolled Bar.
ASTM B188
- Standard Specification for Seamless Copper Bus Pipe and Tube.
ASTM B209
- Standard Specification for Aluminum-Alloy Sheet and Plate.
ASTM B210
- Standard Specification for Aluminum-Alloy Drawn Seamless Tubes.
ASTM B221
- Standard Specification for Aluminum-Alloy Extruded Bars, Rods, Shapes,
and Tubes.
ASTM B234
- Standard Specification for Aluminum-Alloy Drawn Seamless Tubes for
Condensers and Heat Exchangers.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business