INCH-POUND
MIL-DTL-22931D
15 April 2013
SUPERSEDING
MIL-DTL-22931C
21 November 2003
DETAIL SPECIFICATION
CABLES, RADIO FREQUENCY, SEMIRIGID, COAXIAL, SEMI-AIR-DIELECTRIC,
GENERAL SPECIFICATION FOR
This specification is approved for use by all
Departments and Agencies of the Department of Defense
1. SCOPE
1.1 Scope. This specification covers semi-air-dielectric, coaxial, semirigid radio frequency cables with
smooth, corrugated, or braided outer conductors with outside diameters ranging from .500 to 3.125
inches, with an impedance of 50 or 75 ohms (see 3.1). The operating temperature ranges are -55ºC to
+80ºC or -55ºC to +200ºC, as specified (see 3.1), and the storage temperature capability is -65ºC.
1.2 Part or Identifying Number (PIN). The PIN consists of the letter "M" followed by the specification
number, the associated slash sheet number and the sequentially assigned dash number.
M22931
/01
-
001
(Sequentially assigned
dash number)
(Applicable slash sheet
number)
(Specification number)
Comments, suggestions, or questions on this document should be addressed to DLA Land and Maritime,
Columbus, ATTN: VAI, P.O. Box 3990 East Broad Street, Columbus, Ohio 43216-5000 or email to
RFConnector@dla.mil. Since contact information can change, you may want to verify the currency of this
address information using the ASSIST Online database at https://assist.dla.mil.
AMSC N/A
FSC 6145
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business