MIL-DTL-22759/87A
TABLE V.
Fluid table.
Test Fluid
Test temperature
Immersion
(°C (°F))
time (hrs.)
A. MIL-A-8243 Anti - icing and Deicing Defrosting Fluid, undiluted
48 - 50 (118 - 122)
20
B. MIL-A-8243 Anti - icing and Deicing Defrosting Fluid, diluted 60/40
48 - 50 (118 - 122)
20
(fluid/water) ratio
C. MIL-C-43616, Cleaning Compound, Aircraft Surface, Type I
48 - 50 (118 - 122)
20
D. ASTM D1153, Methyl Isobutyl Ketone (For use in Organic Coatings)
20 - 25 (68 - 77)
168
E. SAE AS 1241, Fire Resistant Hydraulic Fluid for Aircraft
48 - 50 (118 - 122)
20
F. MIL-L-7808, Lubricating Oil, Aircraft Turbine Engine, Synthetic Base
118 - 121 (244 - 250)
30
G. MIL-C-87937, Cleaning Compound, Aerospace Equipment, Type II
63 - 68 (145 - 154)
20
or Type IV, undiluted
H. MIL-C-87937, Cleaning Compound, Aerospace Equipment, Type II
63 - 68 (145 - 154)
20
or Type IV, diluted 25/75 (fluid/water) ratio
I. TT-S-735, Standard Test Fluids: Hydrocarbon, Type I
20 - 25 (68 - 77)
168
J. TT-S-735, Standard Test Fluids: Hydrocarbon, Type II
20 - 25 (68 - 77)
168
K. TT-S-735, Standard Test Fluids: Hydrocarbon, Type IV
20 - 25 (68 - 77)
168
L. Dielectric - coolant Fluid Synthetic Silicate Ester Base, Monsanto
20 - 25 (68 - 77)
168
Coolanol 25 or approved equivalent.
M. MIL-G-3056, Gasoline, Automotive , Combat
20 - 25 (68 - 77)
168
RATINGS:
Temperature rating: 260° C (500°F) maximum continuous conductor temperature.
Voltage rating: 600 volts (rms.) at sea level
ADDITIONAL REQUIREMENTS:
Wet arc propagation resistance (Test required for initial qualification only): Test in accordance with
MIL-STD-2223 Method 3006. Measure the damage of the bundle along the axis. The wire is acceptable if the
following criteria are met:
1. A minimum of 67 wires pass the dielectric test.
2. Three wires or less fail the dielectric test in any one bundle.
3. Actual damage to the wire is not more than 3 inches in any test bundle.
4