MIL-DTL-17/186C
Structural return loss: Not applicable.
Capacitance: 24.5 pF per foot, maximum.
Capacitance unbalance: 5 percent maximum.
Part or Identifying Number (PIN): M17/186-00001.
NOTE: Marginal notations are not used in this revision to identify changes with respect to the previous
issue due to the extent of the changes.
Referenced documents. This document references MIL-DTL-17.
---
2/ Measure inductance of a 10-foot ± 2 inch test cable at 1 MHz using a suitable test instrument. The
shield shall be floated and the conductors shall be shorted at the far end. Calculate the impedance (Z)
from the measured inductance (L) and the measured capacitance (C) using the formula:
Z = √ L/C ohms
CONCLUDING MATERIAL
Custodians:
Preparing activity:
Army CR
DLA-CC
Navy EC
Air Force 85
DLA - CC
Review activities:
Army AR, AT, CR4, MI
(Project 6145-2014-022)
Navy AS, MC, OS, SH
Air Force 19, 99
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the information
above using the ASSIST Online database at https://assist.dla.mil.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business