MIL-DTL-17/183C
Air oven:
Tensile strength, percent minimum: 60.
Elongation, percent minimum: 60.
Hot oil immersion:
Tensile strength, percent minimum: 50.
Elongation, percent minimum: 50.
Tensile strength and elongation: 1,300 psi, 160 percent minimum.
Weight: 3 pounds per 100 feet, maximum.
Electrical:
Spark test: 5,000 V rms, minimum.
Voltage withstanding: 5,000 V rms, minimum.
Corona extinction voltage: 1,900 V rms, minimum.
Characteristic impedance: 50 ohms ± 2.
Attenuation: See figure 2.
Structural return loss: See figure 3.
Capacitance: 32.2 pF per foot.
Part or Identifying Number (PIN): M17/183-00001.
Qualification: Not applicable.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with
respect to the previous issue due to the extensiveness of the changes.
Referenced documents. In addition to MIL-DTL-17, this document references the following:
MIL-PRF-39012
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business