For Parts Inquiries call (727) 344-9615
A Service Disabled Veteran Owned Small Business
© Copyright 2015 Integrated Publishing, Inc.

FED-STD-228 Test Methods For Cables And Wire, InsulatedThis method is intended for use in determining the thickness of the insulation of insulated wire and cable. It is not recommended for use when the thickness of the insulation is less than 3/64 inch.

Pages 1 - - 238 - 239 - 240 - 241 - 242 - 243 - 244 - 245 - 246 - 247 - 248 - 249 - 250 - 251 - 252 - 253 - 254 - 255 - 256|||


FED-STD-228A
5.2 The ends (warp yarns) per inch of the layer of tape shall be the results obtained from the specimen
tested.
5.3 The picks (filling yarns) per inch of the layer of tape shall be the results obtained from the specimen
tested.
5.3.1 When more than one specimen is tested, the ends (warp yarns) per inch and the picks (filling
yarns) per inch of the layer of tape shall be the average of the results obtained from the specimens
tested.
5.4 The ends per inch and the picks per inch of each tape tested shall be recorded to the nearest whole
number.
228



For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business

© Copyright 2015 Integrated Publishing, Inc. Site Design & Marketing by Strategico.