For Parts Inquiries call (727) 344-9615
A Service Disabled Veteran Owned Small Business
© Copyright 2015 Integrated Publishing, Inc.

FED-STD-228 Test Methods For Cables And Wire, InsulatedThis method is intended for use in determining the thickness of the insulation of insulated wire and cable. It is not recommended for use when the thickness of the insulation is less than 3/64 inch.

Pages 1 - - 202 - 203 - 204 - 205 - 206 - 207 - 208 - 209 - 210 - 211 - 212 - 213 - 214 - 215 - 216 - 217 - 218 - 219 - 220|||


FED-STD-228A
5. RESULTS
5.1 Unless otherwise specified in the detail specification, two specimens from each inspection unit shall
be tested.
5.2 The uniformity of the zinc coating of the inspection unit shall be the average of the results obtained
from the specimens tested.
5.3 The immersed area of the inspection unit showing fixed copper deposit after each immersion of the
inspection unit shall be recorded to the nearest 5 percent.
5.4 The number of immersions shall be recorded.
192



For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business

© Copyright 2015 Integrated Publishing, Inc. Site Design & Marketing by Strategico.