MIL-DTL-27072/7D
REQUIREMENTS:
Design and construction:
See figure 1
Number of conductors:
2
200 °C
Temperature rating:
Components:
Basic wire:
NEMA HP3-EXBFB*
or NEMA HP3-EWBFB* (see table I)
Conductor:
Silver-coated copper
Primary insulation:
Polytetrafluoroethylene
Colors:
Black
White
Jacket over insulation:
Not applicable
Filler:
Material:
Polytetrafluoroethylene
Lay:
3.0 inches maximum
Cabling:
Not applicable
Binder tape material:
Not applicable
Shield:
Material:
Silver coated copper
Gauge:
38 AWG
Braid angle:
20 to 40 degrees
Jacket undershield:
Not applicable
Sheath:
Material:
Fluorinated ethylene propylene
Wall thickness:
.010 inch (.254 mm) nominal
Tensile strength:
In accordance with MIL-DTL-27072
Ultimate elongation:
In accordance with MIL-DTL-27072
Accelerated aging:
Not applicable
Color:
See MIL-DTL-27072
Finished cable:
See table I
Cold bend:
Mandrel size in accordance with MIL-DTL-27072
Dielectric withstanding voltage:
2,000 V rms
Conductor resistance:
In accordance with basic wire specification
2