INCH-POUND
MIL-DTL-24643/2F
1 October 2009
SUPERSEDING
MIL-DTL-24643/2E
22 August 2002
DETAIL SPECIFICATION SHEET
CABLE, ELECTRICAL, -20 °C TO +90 °C, 300 VOLTS, TYPE LSDCOP AND LSTCOP
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and
MIL-DTL-24643.
Construction, Non-Watertight
First
Copper conductor, coated or uncoated (see table I for size).
-
Second
Separator may be used at manufacturer's option where required to provide free-stripping
-
insulation.
Third
Thermoset insulation with minimum average wall thickness of 0.015 inch. Standard
-
identification code applied by Method 3.
The specified number of conductors (see table I) shall be cabled together with a left-hand
Fourth
-
lay. The length of lay shall be as required for the completed cable to meet the twisting
and bending endurance tests. A tie cord shall be laid straight as a central core in
LSDCOP-1½. Fillers may be used as necessary to form a firm well-rounded assembly.
Fifth
An optional binder.
-
Sixth
Cross-linked polyolefin jacket. Minimum average wall thickness of 0.030 inch.
-
NOTE: Because of the peculiar lay-up of LSDCOP-1½ cable, the centering and circularity requirements shall
not apply.
AMSC N/A
FSC 6145
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business