INCH-POUND
MIL-DTL-23020C
17 November 2005
SUPERSEDING
MIL-C-23020B (SHIPS)
12 April 1965
DETAIL SPECIFICATION
CABLE, COAXIAL (FOR SUBMARINE USE)
Inactive for new design after 16 June 1997
This specification is approved for use by all Depart-
ments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the specific requirements for coaxial cables intended for
submarine applications.
1.2 Part or Identifying Number (PIN). The PIN consists of the "RG" number as specified on the
associated specification sheet:
Example: RG-264C/U
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements of
documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
Comments, suggestions, or questions on this document should be addressed to: Defense
Supply Center Columbus, ATTN: VAI, P.O. Box 3990, Columbus OH 43218-3990 or by email
to RFConnectors@dla.mil. Since contact information can change, you may want to verify the
currency of this address information using the ASSIST Online database at
ASMC N/A
FSC 6145
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business