INCH-POUND
MIL-DTL-13241D
2 February 2010
SUPERSEDING
MIL-DTL-13241C
20 February 2009
DETAIL SPECIFICATION
WIRE, ELECTRICAL; ANTENNA,
(WIRE WS-12( )/U AND WIRE WS-13( )/U)
Inactive for new design after 16 June 1997.
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers bare, copper-clad steel, stranded wire having 40 percent
electrical conductivity.
1.2 Classification. The wire offered under this specification as specified in table I.
TABLE I. Wire classification.
Type
AWG.
Nominal
Nominal
Number
designation
size
o.d. (inch)
wt./1000 ft.
strands
WS-12( )/U
7
12
0.242
128.1 lbs.
WS-13( )/U
3
12
0.174
54.8 lbs.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements
documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government documents.
Comments, suggestions, or questions on this document should be addressed to Defense Supply Center
Columbus, ATTN: DSCC-VAI, P.O. Box 3990, Columbus, Ohio 43218-3990, or email to
WireCable@dla.mil. Since contact information can change, you may want to verify the currency of this
address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 6145
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business