MIL-DTL-13075C
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards and handbooks
form a part of this document to the extent specified herein. Unless otherwise specified, the issues of
these documents are those cited in the solicitation or contract.
COMMERCIAL ITEM DESCRIPTION
A-A-59551
-
Wire, Electrical, Copper.
DEPARTMENT OF DEFENSE SPECIFICATION
MIL-DTL-3432 -
Cables, (Power and Special Purpose) And Wire, Electrical (300
And 600 Volts)
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or
from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia,
PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the documents are the issues of the documents cited in the
solicitation or contract (see 6.2).
NCSL INTERNATIONAL
NCSL-Z540.3
-
Requirements for the Calibration of Measuring and Test
Equipment
(Copies of this document are available from https://www.ncsli.org or from NCSL International, 2995
Wilderness Place, Suite 107, Boulder, CO 80301.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the references
cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes
applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Material. The material for the wire shall be as specified herein. The best material commercially
available for the intended purpose shall be used when a definite material is not designated.
3.2 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or
environmentally preferable materials should be used to the maximum extent possible, provided that the
material meets or exceeds the operational and maintenance requirements and promotes economically
advantageous life cycle costs.
3.3 Design and construction.
3.3.1 Conductors. Each conductor shall be equivalent to 4107 circular mils, (No. 14 AWG), class K
stranded in accordance with A-A-59551.
3.3.2 Buna-S insulation. The Buna-S insulation shall meet the requirements specified in MIL-DTL-3432.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business