For Parts Inquiries call (727) 344-9615
A Service Disabled Veteran Owned Small Business
© Copyright 2015 Integrated Publishing, Inc.

FED-STD-228 Test Methods For Cables And Wire, InsulatedThis method is intended for use in determining the thickness of the insulation of insulated wire and cable. It is not recommended for use when the thickness of the insulation is less than 3/64 inch.

Pages 1 - - 66 - 67 - 68 - 69 - 70 - 71 - 72 - 73 - 74 - 75 - 76 - 77 - 78 - 79 - 80 - 81 - 82 - 83 - 84|||


FED-STD-228A
5.3 Unless otherwise specified in the detail specification, two specimens, one from each end of the
inspection unit, shall be tested.
5.4 The angle of the wrap of the inspection unit shall be the average of the results obtained from the
specimens tested.
5.5 The angle of the wrap of the inspection unit shall be recorded to the nearest 5°.
56



For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business

© Copyright 2015 Integrated Publishing, Inc. Site Design & Marketing by Strategico.