INCH-POUND
MIL-DTL-915/48D
22 August 2002
SUPERSEDING
MIL-C-915/48C
29 September 1989
DETAIL SPECIFICATION SHEET
CABLE, SPECIAL PURPOSE, ELECTRICAL, FOR OUTBOARD USE ONLY
(NOT FOR INBOARD USE), TYPE 2SWF
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification
sheet and the issue of MIL-DTL-915 listed in that issue of the Department of Defense Index of
Specifications and Standards (DoDISS) specified in the solicitation.
REQUIREMENTS:
Qualification required.
Construction (watertight)
First
- Copper, conductor, in accordance with ASTM B 286, size 22-7, tin coated.
Second - Polyethylene insulation, natural, type II, class L, grade 4 in accordance
with L-P-390. Nominal thickness 0.010 inch. Colored insulation, one
black and one white conductor for each pair.
Third
- Clear polyamide jacket on each conductor in accordance with ASTM D 4066.
Nominal thickness 0.003 inch.
Fourth - Two conductors, one black and one white, cabled together with nominal lay of
2.5 inches to form each pair.
Fifth
- Binder tape over each pair, at manufacturer's option, applied helically with
overlap.
Sixth
- Braided shield of AWG no. 34 or no. 36 tin coated copper. Braid angle 30 to
35 degrees; minimum coverage of 85 percent.
AMSC N/A
1 of 4
FSC 6145
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business