MIL-DTL-915-10 Cable, Power Electrical, 600 Volts, For Outboard Use Only \(Not For Inboard Use\), Type Mcsf-4

Pages 1 - 2 - 3

INCH-POUND

MIL-DTL-915/10F

22 August 2002

SUPERSEDING

MIL-C-915/10E

29 September 1989

DETAIL SPECIFICATION SHEET

CABLE, POWER ELECTRICAL, 600 VOLTS, FOR OUTBOARD USE ONLY

(NOT FOR INBOARD USE), TYPE MCSF-4

This specification is approved for use by all Departments and Agencies of the

Department of Defense.

The requirements for acquiring the product described herein shall consist of this specification

sheet and the issue of MIL-DTL-915 listed in that issue of the Department of Defense Index

of Specifications and Standards (DoDISS) specified in the solicitation.

REQUIREMENTS:

Qualification required.

Construction (watertight)

First

- Two conductors AWG No. 6, class G stranding, and two conductors AWG

No. 1, class G stranding. Stranding shall be 7 by 7 for the no. 6 and 7 by 19 or

19 by 7 for the No. l. Strands shall be 0.025-inch nominal diameter drawn

copper alloy in accordance with ASTM B 105 alloy 85.

Second - A separator tape over each conductor.

Third

- Synthetic rubber insulation, 0.070-inch nominal wall thickness on all

conductors. Color code one black and one white conductor of each size.

Fourth - Insulation jacket of clear polyamide in accordance with ASTM D 4066.

Nominal wall thickness of 0.003 inch.

Fifth

- The four conductors (one black and one white of each size) cabled together -

maximum length of lay 20 inches. The No. 6 conductors shall be diametrically

opposite to each other. Either nonfibrous or a combination of nonfibrous and

fibrous fillers may be used to form a firm, well-rounded assembly.

Sixth

- Binder or combination binder and barrier.

Seventh - Reinforced polychloroprene jacket required. Nominal jacket thickness 0.125

inch. Cable surface marking required.

AMSC N/A

1 of 3

FSC 6145

DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.