INCH-POUND
MIL-DTL-24643/21F
1 October 2009
SUPERSEDING
MIL-DTL-24643/21E
22 August 2002
DETAIL SPECIFICATION SHEET
CABLE, ELECTRICAL, -20 °C TO +105 °C, TYPES LSTCJU AND LSTCTU
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and
MIL-DTL-24643.
Construction, Watertight with Circuit Integrity
First
One iron and one constantan conductor in Type LSTCTU, for Type J thermocouple in
-
accordance with ANSI MC96.1; one copper and one constantan in Type LSTCTU, for
Type T thermocouple in accordance with ANSI MC96.1 (see table I for diameter).
Thermoset insulation (see table I for diameter).
Second
-
Third
Optional glass braid.
-
Fourth
Covering. Printed identification as follows: Type LSTCJU shall have the legend "8
-
(GRAY)" printed on the iron conductor and the legend "3 (RED)" printed on the
constantan conductor. Type LSTCTU shall have the legend "6 (BLUE)" printed on the
iron conductor and the legend "3 (RED)" printed on the constantan conductor (see table I
for diameter).
Fifth
The two conductors shall be cabled together with a lay in accordance with 3.4.4 of MIL-
-
DTL-24643. Fillers may be used as necessary to form a firm, well-rounded assembly.
Sixth
An optional binder.
-
Seventh
Cross-linked polyolefin jacket. Minimum average wall thickness of 0.040 inch.
-
AMSC N/A
FSC 6145
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business